Reboots Go - First Use

Thank you for choosing Reboots!  In order to achieve optimal regeneration and relaxation, correct application is important. 

Therefore, we have summarized some important points for you below.

Check scope of delivery

You have received your delivery? Congratulations! First of all, please check that everything is there.

The following should be included in your package:

Is everything complete? Great, then you're ready to go!

Commissioning

1 Multi - Plug und Multi - Plug air hose set:

First, attach the multi-plug to the control unit. There are two clips on the multi-plug. You can press them in and then plug the multi-plug into the device. Make sure that the arrows printed on the plug are on the upper side. You can then disconnect the cable from the control unit in the same way after use. Next, connect each of the cuff plugs to your cuff(s). 

Start with the longest tube and connect it to the lowest socket. For better orientation, the correct cuff connector is light gray - and therefore lighter, than the other connectors.  The cuff plugs are then always plugged in from the feet towards the center of the body. The darkest cuff plug goes accordingly into the top socket of the cuffs. Press the cuff links firmly into the sockets here.

Right: light gray plug for the lowest socket (at the base).

Left: dark gray plug for the top socket (close to the center of the body)

Tip: It's easiest to keep your cuff plugs plugged in at all times and store your cuffs with the tubing plugged in. 

Also, please make sure that you do not accidentally twist the cables. If you follow the two rightmost hoses from the control unit, they should end at the right and left feet. This will ensure that your cuffs pump in the correct order, from the feet towards the center of the body:

2 Put on your Reboots:

The time has come: you can put on your Reboots. With the help of the zippers you can easily get into the cuffs.  Make sure you pull the cuffs up as high as possible. On your feet, only the tips of your toes - not your whole toes - should stick out. 

3 Switch on control unit:

On the right side of your control unit you will find a toggle switch for switching on and off. If the device does not turn on, the battery is most likely empty. You can still start your first use by simply using the included charging cable. This way you can always use your Reboots Go even if the battery is empty. To charge the battery, simply leave the power adapter plugged in for a few hours after your first use. 

Handling

Before you start with your first use, check that the hoses for the air supply are not disconnected at any point. It is also best to lie down horizontally. This way, your reboots can work optimally with gravity.

4 Choose time:

By default, a massage session is always set to 30 minutes. However, with the "+" and "-" buttons you can always extend or shorten the duration by one minute. The maximum duration you can set is 99 minutes. After the time has elapsed, the pump switches off automatically.

5 Set pressure:

By default, the pressure is always set to level 8. However, you can adjust the intensity individually from 1 (light pressure) to 16 (maximum pressure) by pressing the "+" and "-" buttons.

Tip: The pressure sensation is very individual. It is best to start with light pressure and then work your way up to your optimum pressure from application to application. 

6 Choose a program:

Now you can choose your individual program. Program A is always choosen by default. This program is optimal for your first use.

Important for you to know: The program cannot be changed during operation. If you want to select another program, pause the device and then select the desired program.

7 Deactivate air chambers:

By default, all 6 compression chambers are enabled. However, if you want to exclude certain chambers from the massage, you can do so here. This way you can individually exclude more pressure-sensitive areas from the massage and still enjoy the massage.

8 Start:

After you have switched on the control unit at the toggle switch, it is in pause mode. You can see this at first glance by the orange light.  Now press the Start button to start the application and enjoy your massage. If you press the button again, you can also interrupt the application at any time. 

Have fun relaxing!

Is something not working?

In the category Help with problems you will find solutions to the most common sources of errors.

If you have any questions further questions or feedback, please do not hesitate to contact us!

Write to us: hallo@reboots.de

Call us:  +49 6661 748 9106

Write us on Whats App

Instagram: www.instagram.com/rebootsrecovery

We are available for you from Monday to Friday from 8am -12pm and from 12:30pm - 4:30pm :)