Reboots One / One Lite - First Use

Thank you for choosing Reboots! 

In order to achieve optimal regeneration and relaxation, correct application is important. 

Therefore, we have summarized some important points for you below.

Check scope of delivery

You have received your delivery? Congratulations! First of all, please check that everything is there.

The following should be included in your package:

Is everything complete? Great, then you're ready to go!

Commissioning

1 Attach the multi - plug:

First, attach the two multi-plugs to the control unit (Note: There is only one multi-plug on the Lite model). There are small arrows printed on the plug, which should be located on the top side. You will also find a small nipple on both multi-plugs and a matching small recess on the control unit. Plug the multi-plugs into the control unit so that the arrows are at the top and the nipples fit into the recesses and press them both firmly in place. 

2 Connecting the cuff plugs:

Next, connect each cuff connector to your cuff(s). 

Start with the longest tube and connect it to the lowest socket on the feet. For better orientation, the correct cuff connector is light gray - and therefore lighter, than the other connectors.  The cuff plugs are then always plugged in here from the feet towards the center of the body. The darkest cuff-link plug belongs accordingly in the uppermost socket of the cuffs.  Press the cuff links firmly into the sockets here.

Right: light gray plug for the lowest socket (at the base).

Left: dark gray plug for the top socket (close to the center of the body)

Tip: It's easiest to keep your cuff plugs plugged in at all times and store your cuffs with the tubing plugged in.

All 8 connections are divided into two hoses at the Quick Connector. The right connection should lead to the two lowest cuff connectors at the feet of your cuffs, the two left hoses to the connections at the top of the groin.

3 Put on your Reboots:

The time has come: you can put on your Reboots. With the help of the zippers you can easily get into the cuffs.  Make sure you pull the cuffs up as high as possible. On your feet, only the tips of your toes - not your whole toes - should stick out. 

4 Activate remote control:

Before using your remote control for the first time, please first remove the battery protector (a white plastic part sticking out of the bottom of your remote control). Then please insert a suitable battery (type: CR2032). Due to shipping policies, we are not allowed to include a battery.

Handling

Before you start with your first application, check once that the hoses for the air supply are not disconnected at any point. It is also best to lie down horizontally. This way, your Reboots can work optimally with gravity.

Turn on the control unit:

On the display of your control unit you will find the power button. Here you can switch the control unit on and off.

Select program:

Now you can choose your individual program. Program A is always selected by default. This program is optimal for your first use.

Important for you to know: The program cannot be changed during operation. If you want to select another program, pause the device and then select the desired program.

Select time:

By default, a massage session is always set to 30 minutes. However, with the "+" and "-" buttons you can always extend or shorten the duration by one minute. The maximum duration you can set is 99 minutes. After the time has elapsed, the pump switches off automatically.

Select pressure:

By default, the pressure is always set to 150mmHg. However, you can adjust the intensity individually from 30mmHg (light pressure) to 240mmHg (maximum pressure) using the "+" and "-" buttons.

Tip: The pressure sensation is very individual. It is best to start with light pressure and then work your way up to your optimum pressure from application to application.

Deactivatable chambers:

By default, all 8 (6 for the Lite model) compression chambers are enabled. However, if you want to exclude certain chambers from the massage, you can do so here. This way you can individually exclude more pressure sensitive areas from the massage and still enjoy the massage.  You can select individual chambers by deactivating them with one click along the image of the leg on your controller. Click again to reactivate the chambers.

Start:

After you have switched on the control unit, it is in pause mode. Now press the Start button to start the application and enjoy your massage. If you press the button again, you can also interrupt the application at any time.

Have fun relaxing!

Is something not working?

In the category  Help with problems  you will find solutions to the most common sources of errors.

If you have any questions further questions or feedback, please do not hesitate to contact us!

Write to us: hallo@reboots.de

Call us: +49 6661 748 9106

Write us on Whats App

Instagram: www.instagram.com/rebootsrecovery

We are available for you from Monday to Friday from 8am -12pm and from 12:30pm - 4:30pm :)