Applies to the following models: Reboots Go, Reboots One, Reboots One Lite
Normally, your Reboots device is delivered with the Quick Connectors already connected. If you want to use your cuffs as they were delivered (for example, only with the Boots or the Pants), then you do not need to do anything else here.
The Quick Connectors are used if you want to use several cuffs at the same time - for example the Boots with an Arm Cuff.
After you have plugged the cuff connectors into the cuff (help for connecting the boots and pants can be found here: Connection of the cuff plugs and help connecting your Arm Cuffs here: Connection of the arm cuffs), you connect the multi-plugs of your cuffs with the Quick Connector. You can easily plug both parts together here.
On the Quick Connector you will find - just like on the multi-plug - two arrows. These should point to each other (see video below). Also make sure that you press both together firmly and that nothing is crooked.
For Reboots One / One Lite:
Again, there is also a small additional nipple on one side of the multi-plug. On your Quick Connector, there is a corresponding small recess into which it fits exactly. If this is the case, then your Quick Connector is connected correctly.
If you have further questions about the application or feedback about our products, we would be happy to hear from you!
Send us a message: email@example.com
Call us: +49 6661 748 9106
Write us on Whats App
We are available for you from Monday to Friday from 8am - 12pm and from 12:30pm - 4:30pm :)
Please sign in to leave a comment.