Function & setting of the hold timer

The Reboots One Pro is the only model that offers you the hold timer function.

You want to further customize your application? Then this is the right function for you.

You can use the Hold Timer to set how long the set pressure is to be held in each chamber.

How does it work?

You set the Hold Timer on the control unit of your Reboots One Pro to your desired time. In 1-second increments, you can specify how long between 0 and 5 seconds the pressure should be held in each chamber.

Depending on the selected program, the chambers then pump up until the target pressure you set is reached. Only then does the Hold Timer start and the target pressure is held in the chamber for 0 to 5 seconds - depending on your setting - before the pressure is released again and the next chamber is pumped up.

If you have any questions further questions or feedback, please do not hesitate to contact us!

Write to us: hallo@reboots.de

Call us:  +49 6661 748 9106

Write us on Whats App

Instagram: www.instagram.com/rebootsrecovery

We are available for you from Monday to Friday from 8am -12pm and from 12:30pm - 4:30pm :)